Bus Plugs for Siemens / ITE / Gould plug-in bus duct.
Siemens offers a variety of busway series, including the venerable BD series (Bull Dog), popular in the manufacturing-heavy midwest. Legacy continues to stock and offer reconditioned bus plugs for these older bus duct series.
The standard fusible bus plugs are generally available and ship quickly.
We do have limited quantities of Siemens current Sentron series busway in stock and available on our webstore. Please contact us if you don't see what you need or have any special requirements.
The BD series of bus duct was originally manufactured by ITE and later by Gould. The BOS style of bus plugs will install on any BD busway, regardless of the manufacturer.
The BD busway was originally labeled as Bull Dog bus duct and there are still Bulldog duct runs working.
Reconditioned bus plugs for Siemens' BD plug-in busway.
Reconditioned UV bus plugs for Siemens (ITE and Gould) XL-U plug-in bus duct.
The UV bus plugs for the XL-U busway were manufactured originally by ITE, then by Gould, and finally Siemens. The UV plugs and the XL-U busway are compatible, irrespective of manufacturer. A UV bus plug manufactured by ITE will plug onto XL-U bus duct manufactured by Siemens or Gould, and vice-versa.
The UV bus plug commonly uses fuses for the over-current protection. The table below lists the catalog number for the fusible UV bus plugs. The UV bus plugs were manufactured with circuit breakers as the over-current protection instead of fuses. Please contact us for available units.
240 volt | 600 volt | |||
---|---|---|---|---|
3 wire | 4 wire | 3 wire | 4 wire | |
30 amp | UV321G | UV421G | UV361G | UV461G |
60 amp | UV322G | UV422G | UV362G | UV462G |
100 amp | UV323G | UV423G | UV363G | UV463G |
200 amp | UV324G | UV424G | UV364G | UV464G |
400 amp | UV325G | UV425G | UV365G | UV465G |
600 amp | UV326G | UV426G | UV366G | UV466G |
800 amp | UV327G | UV427G | UV367G | UV467G |
All of our reconditioned bus plugs ship with the ground tab and lug installed. All of the UV bus duct has a slot to accept the ground, even if the busway does not have a dedicated ground bar in the bus duct.
Contact us at 248-619-9710 if you have any questions or need assistance identifying your bus plug.
Reconditioned and surplus RV bus plugs for Siemens XL-X plug-in bus duct. The XL-X busway was originally manufactured by ITE, then later by Gould. The XL-X bus plugs will install on the XL-X busduct regardless of the manufacturer.
Bus plugs for Siemens' XJ-L plug-in busway.
The XLVB bus plugs are floor operable, allowing the bus plug to be turned on and off from the floor with the attachment of chains/ropes to the bus plug handle.
The XLVB bus plugs from Siemens are designed for use with the XJ-L plug-in busway.
The XJ-L series of bus duct was originally manufactured by ITE and later by Gould before it was taken over by Siemens. The XLVB style bus plugs will install on any XJ-L busway, regardless of the manufacturer.
We have limited availability of the Sentron series bus plugs. The Sentron series has consisted of several versions and not all of the bus plugs are interchangeable.