Reconditioned UV bus plugs for Siemens (ITE and Gould) XL-U plug-in bus duct.
The UV bus plugs for the XL-U busway were manufactured originally by ITE, then by Gould, and finally Siemens. The UV plugs and the XL-U busway are compatible, irrespective of manufacturer. A UV bus plug manufactured by ITE will plug onto XL-U bus duct manufactured by Siemens or Gould, and vice-versa.
The UV bus plug commonly uses fuses for the over-current protection. The table below lists the catalog number for the fusible UV bus plugs. The UV bus plugs were manufactured with circuit breakers as the over-current protection instead of fuses. Please contact us for available units.
|240 volt||600 volt|
|3 wire||4 wire||3 wire||4 wire|
All of our reconditioned bus plugs ship with the ground tab and lug installed. All of the UV bus duct has a slot to accept the ground, even if the busway does not have a dedicated ground bar in the bus duct.
Contact us at 248-619-9710 if you have any questions or need assistance identifying your bus plug.