Reconditioned Siemens U8C4800 Bus Plug - 600-volt, 800-amp, 4-wire, KM breaker 30kAIC at 480-volt, bus plug for use on Siemen's XL-U plug-in bus duct.
Overcurrent protection and on-off actuation is provided by the installed KM3F800 molded case circuit breaker frame and appropriate rating plug.
The bus plug has a neutral lug and stab that connects to the XL-U busway's neutral bus bar.
This bus plug includes the hanger which attaches to the duct for proper installation of the bus plug. The Siemen's 800-amp UV bus plug uses two port holes on the UV duct.
This U8C4800 comes with mechanical lugs standard.
This bus plug ships on a skid by common freight carrier.
This bus plug has previously been manufactured by Gould and ITE before Siemens. All of the manufacturer's bus plugs will plug into the XL-U busway.
Manufacturer | Siemens |
---|---|
Condition | Reconditioned |
Max. Volts | 600 |
Max. Amps | 800 |
Wire | 4-wire |
Series | XL-U |
Fuse/Breaker | circuit breaker |
Ground Tab | gnd no |