Square D Plug In Tap Box for the Square D's I-Line series bus duct. 600 volt, 400/600 amp, 3 wire, ground.
This plug-in tap box can be used with copper or aluminum plug-in I-Line busway. This tap box is rated for 600 amps max. Square D uses the one tap box for 400 amp and 600 amp busway. It can also be used with 225 amp I-Line, plug-in bus way.
Mechanical lugs are standard for connecting the incoming electrical power.
The tap box has a ground tab which makes connection with the bus duct's ground. If the duct does not have a ground, the tap box will still plug-in as the slot for the ground tab is standard on I-Line busway plug-ins. But, no grounding will be present in the tap box.
There is no overcurrent protection or on-off switching with the tap box.
Plug-in Style
This tap box mounts to the busway in any of the plug-in ports on the I-Line bus duct. It can be mounted anywhere along the bus duct, where there is a plug-in.
When feeding power to an I-Line bus duct run with a plug-in tap box, two end closures will be needed to close the run on each end.
Dimensions
Length: 26 inches (along the duct)
Height: 19 inches
Depth: 8 inches
weight: 60 lbs
Shipping
This product ships LTL freight on a skid due to its' size.
Manufacturer | Square D |
---|---|
Tap Box Style | Plug In |
Condition | Reconditioned |
Max. Volts | 600 |
Max. Amps | 600 |
Wire | 3-wire |
Series | I-Line I |
Ground Tab | gnd yes |