Reconditioned Cutler Hammer CP4HD363G Bus Plug - 600-volt, 100-amp, 3-wire, fusible bus plug for use on Cutler Hammer CP2 and CP4 series plug-in bus duct.
The CP4 series bus duct and plugs were originally manufactured by Cutler Hammer, and is now obsolete.
This bus plug has a ground stab to connect to the ground in the CP series plug-in bus duct.
By default the bus plug is set for R-class fuses, and can be used for over current protection between 70-amp and 100-amp with proper fusing.We can set this plug up for other fuse classes, if required.
Maximum horsepower rating with time delay fuses: 75 hp.
This CP4HD363G comes with mechanical lugs standard.
Manufacturer | Cutler Hammer - Westinghouse - Eaton |
---|---|
Condition | Reconditioned |
Max. Volts | 600 |
Max. Amps | 100 |
Wire | 3-wire |
Series | CP4 |
Fuse/Breaker | fuses |
Ground Tab | gnd yes |