Siemens CBA306 Center Tap Box, Aluminum, 600 amp, 3 wire for Bulldog series

Reconditioned Siemens CBA306 Center Tap Box for BD Series Bus Duct, 600 Amp, 3-wire, plug in, 10 ft section with aluminum busbar.

This center tap box is a convenient way to supply power to the middle of a busway run. It takes the place of the standard end cable tap box, EBA306.

The tap box is a 10 foot straight length with an enclosure in the center to supply incoming power. It has eight plug-ins for BOS-style bus plugs. It replaces a standard section 10 foot section of ABD306 bus duct.

Notes:
• The above images show the tap box with the enclosure on the top, but it comes out from the side, where the plug-ins for the bus plugs are, not the top or bottom.
• If the tap box is being used for a new run, then two end caps, ECP10, are needed to close the busway run.

The tap box busbar material is aluminum and rated for indoor use only.

The CBA306 tap box has (3) 600MCM mechanical lugs for incoming power.

Each CBA306 Tap Box includes:
• (2) Hangers (BDH10)
• (2) Inspection Covers with mounting hardware
• Connection Hardware


Dimensions:
• Weight: 240lbs
• 8.875" H x 6.0625" W x 120" L
• The enclosure is 24 inches high (away from the busway).

Please note, this item requires palletization and ships via freight service.

If you require a full busway configuration including end caps and tap boxes, please give us a call at 248-619-9710 to speak to one of our in house experts.