Your Premier Destination for Top-Quality Reconditioned Bus Duct Solutions and Expertise!
☎ 248-619-9710
Reconditioned Westinghouse TAP365 Bus Plug - 600-volt, 400-amp, 3-wire, fusible bus plug for use on Cutler Hammer / Westinghouse Lifeline/Standard series plug-in bus duct.
This bus plug is for use on Lifeline/Standard bus duct, and is not suitable for Cutler Hammer/ Eaton's Pow-R Way or Pow-R Way III bus duct.
Our stock is constantly changing, and we may have different styles of this bus plug. All of the styles will work with the Lifeline/Standard series plug-in bus duct.
By default the bus plug is set for R-class fuses, and can be used for over current protection between 225-amp and 400-amp with proper fusing.We can set this plug up for other fuse classes, if required.
This TAP365 comes with mechanical lugs standard.
This bus plug is currently offered by Eaton. It was originally manufactured by Cutler Hammer. This article can help you determine which busway series you have and identify the correct bus plugs for your application.
Manufacturer | Westinghouse - Cutler Hammer - Eaton |
---|---|
Condition | Reconditioned |
Max. Volts | 600 |
Max. Amps | 400 |
Wire | 3-wire |
Series | Standard/Lifeline |
Fuse/Breaker | fuses |
Ground Tab | gnd no |