Reconditioned Cutler Hammer CP4HD361 Bus Plug - 600-volt, 30-amp, 3-wire, fusible bus plug for use on Cutler Hammer CP2, CP3, and CP4 series plug-in bus duct.
The CP4 series bus duct and plugs was originally manufactured by Cutler Hammer, and is now obsolete.
By default the bus plug is set for R-class fuses, and can be used for over current protection between 5-amp and 30-amp with proper fusing.We can set this plug up for other fuse classes, if required.
Maximum horsepower rating with time delay fuses: 20 hp.
This CP4HD361 comes with mechanical lugs standard.
Manufacturer | Cutler Hammer - Westinghouse - Eaton |
---|---|
Condition | Reconditioned |
Max. Volts | 600 |
Max. Amps | 30 |
Wire | 3-wire |
Series | CP4 |
Fuse/Breaker | fuses |
Ground Tab | gnd no |